clutch fork re-set

[vern]

vid updated

4449FD17-6D3A-4B77-B4BD-3AA6CC0CF2BE-5464-0000054E6DD5C615.mp4 video by vern2 - Photobucket

My clutch kit with ring attached in wedge collar can be seen here

 

[vern]

My theory could be that the ring inside the effing wedge collar has fallen off and is in between the pressure plate and friction plate which would explain it not locking in??

 

[B6lee]

My theory could be that the ring inside the effing wedge collar has fallen off and is in between the pressure plate and friction plate which would explain it not locking in??

yep, id go with that !
i did here once that there were a few faulty ones that just simply wouldn hold the bearing.

nice comment at the end :lol:


box needs to come back out im affraid :ninja:

 

[vern]

yep, id go with that !
i did here once that there were a few faulty ones that just simply wouldn hold the bearing.

nice comment at the end :lol:


box needs to come back out im affraid :ninja:

Oh i hope im not lumbared with a faulty one then

Yeah im only prolonging the inevitable i think with taking the box off yet again!

lol that comment on the vid is rather tame compared with earlier remarks :whistling:

 

[fq-craigus]

That's common speech when working on an Evo! Lol if its faulty they should replace where did you buy from,

 

[vern]

Bob from Aztec

 

[B6lee]

i always check its all ok as soon as the box is bolted up just in case

 

[vern]

Is there anyone localish to me that would care to help me fit fit the box back on aswell as everything else.
Im running out of time to get this done, willing to pay some one for their help if they have the know how?

Based in Heathfield -East Sussex

Cheers

 

[B6lee]

to far for me mate or i would of sorry

 

[vern]

to far for me mate or i would of sorry

Many thanks anyway bud

 

[vern]

Ok so a great update to reveal tonight, bit the bullet and me and my old took the box off yet again to see the wedge collar ring that should sit inside the pressure plate had falled out and was trapped in between the friction plate and pressure plate.

Manged to retreive it re-align the clutch, bolt the box back up and hey presto the release bearing engagaed, happy is an understatement

Hopefully bolt it back to together at the weekend.

Thanks for the advice guys.

 

[fq-craigus]

Good to hear mate, soon be driving it

 

[B6lee]

its anoying i know but it had to be done. glad you sorted it !!