S
spooling
New Member
- Messages
- 3
hi guys
The name is Alex.
i moved to the UK a couple month ago from florida.
But because of insurance i had to buy a dead slow car so i got me a mini.
But now that i have managed to get my 6 years no claim bonus letter from my old insurance in the US, it has been cut down by 6!
If i had bought the car i wanted
2004 evo 8 FQ320 it would have costed me 6k a year lolz
I am day dreaming about owning this baby...
In 2 month i will be looking for one of them.
if it is not an 8 fq320 then atleast a 9mr.
I have never owned a 4wd car but this was my last project:
2006 mazda 3.
FWD 2.3L 4cyl
Hiboost Big boost turbo KIT : 18PSI around 420WHP
T3/T40E 60trim, .63 A/R TH
Cast Iron 4-1 Ported manifold
Wastegate Port pipe
3" downpipe
Tial 38mm wastegate
Haltech F10x ECU
Haltech boost controler
Greddy Type RS BOV
wiseco pistons 8.1:1 CR
carillo rods
cosworth rod bearings
arp main and head studs
hiboost billet gears (3rd/4rd)
custom ACT clutch
Spin on conversion
Cossi oil cooler
3 Bar map sensor
750CC RC injectors
HKS Highpower CBE
TB coolant bypass
Buddy Club racing Condencer (BCC)
Corcksport rear engine blue mount insert
I am located in Bournemouth... any local meetings?
Just like any of u gear heads, i am already looking for mods to do, if i was in the US, i knew where to get the stuffs.
Any good shops to have a look online?
well thanks guys...
And i am looking forward to learning a lot about the car and even more forward to drive my own.
The name is Alex.
i moved to the UK a couple month ago from florida.
But because of insurance i had to buy a dead slow car so i got me a mini.
But now that i have managed to get my 6 years no claim bonus letter from my old insurance in the US, it has been cut down by 6!
If i had bought the car i wanted
2004 evo 8 FQ320 it would have costed me 6k a year lolz
I am day dreaming about owning this baby...
In 2 month i will be looking for one of them.
if it is not an 8 fq320 then atleast a 9mr.
I have never owned a 4wd car but this was my last project:
2006 mazda 3.
FWD 2.3L 4cyl
Hiboost Big boost turbo KIT : 18PSI around 420WHP
T3/T40E 60trim, .63 A/R TH
Cast Iron 4-1 Ported manifold
Wastegate Port pipe
3" downpipe
Tial 38mm wastegate
Haltech F10x ECU
Haltech boost controler
Greddy Type RS BOV
wiseco pistons 8.1:1 CR
carillo rods
cosworth rod bearings
arp main and head studs
hiboost billet gears (3rd/4rd)
custom ACT clutch
Spin on conversion
Cossi oil cooler
3 Bar map sensor
750CC RC injectors
HKS Highpower CBE
TB coolant bypass
Buddy Club racing Condencer (BCC)
Corcksport rear engine blue mount insert
I am located in Bournemouth... any local meetings?
Just like any of u gear heads, i am already looking for mods to do, if i was in the US, i knew where to get the stuffs.
Any good shops to have a look online?
well thanks guys...
And i am looking forward to learning a lot about the car and even more forward to drive my own.