OBD II compatible

[ASC7]

Does anyone know if the evo mk6 (1999) is OBD II compatible.....trying to check if my new turbogauge mk 3 is actually compatible with my car...or i've made a mistake!!

 

[sponners]

iirc the evo 6 is not obd2 compliant, the evo 7-9 are.

if you were to a fit a later ecu then it would become compliant.

 

[ASC7]

iirc the evo 6 is not obd2 compliant, the evo 7-9 are.

if you were to a fit a later ecu then it would become compliant.

is it just a case of swapping the ecu's over, or is it more involved...re-mapping etc..

 

[ElDopesta]

iirc the evo 6 is not obd2 compliant, the evo 7-9 are.

if you were to a fit a later ecu then it would become compliant.

+1 on that!

is it just a case of swapping the ecu's over, or is it more involved...re-mapping etc..

I presume that there is a pin swap involved but Sponners is still here and will no doubt be with you shortly.


El

 

[sponners]

on your car you have the option of running a 7 ecu or a evo 8 260 ecu.

to fit these though will involve a few wires in the ecu loom to be cut/swopped.

...and idealy they will need to be remapped........even if its only to remove the CEL that the swop will cause.

 

[ASC7]

Thanks for the input everyone.....probably easier to send back the device....a little bit gutting though as it looked a good bit of kit to interrogate the ECU with

 

[ElDopesta]

Might be the best decision all round!


El