HKS SSQV Blow Off Dump Valve - Evo 4

[sponners]

is the valve not dumping enough for you?


not a lot you can do really unless you want to take it apart and fit a softer spring, cut the original down maybe.....not a mod I've done or would recommend.


upto to you if you want to try it.....could end in tears though.

 

[1982ollie]

is the valve not dumping enough for you?


not a lot you can do really unless you want to take it apart and fit a softer spring, cut the original down maybe.....not a mod I've done or would recommend.


upto to you if you want to try it.....could end in tears though.

The dump is fine - Just the bailey I tried before was louder - I'm also still getting slight idle problems and sometimes a cut out, but no where near as much as the bailey used to cut out. Any ideas.

Thanks Mate - Really appreciate it!!

 

[dic]

have a look at this thread about idleing issues mate. i have the same prob, hopeing to meet with cossie1 in the next couple of weeks so he can map my engine and sort the stalling issue at the same time fingers crossed....
http://www.evoowners.co.uk/f10/hks-eids-k-does-do-what-1980.html

 

[gooner8]

i've had no problem's with mine? Idle problem's may be once or twice? My mate got a hks on his e7 with no prob's. Weird one mate!?

 

[sponners]

The dump is fine - Just the bailey I tried before was louder - I'm also still getting slight idle problems and sometimes a cut out, but no where near as much as the bailey used to cut out. Any ideas.

Thanks Mate - Really appreciate it!!

oh got ya


if you can stiffen up the spring at all then this will help (stretch, shim ???)



or could adapt to recirculate.......but then you'll hardly hear the valve and I'm guessing thats no good

 

[sponners]

I've also got a HKS eids kicking around somewhere if anyone wants it, how much it will help though......never used it.

 

[dic]

I've also got a HKS eids kicking around somewhere if anyone wants it, how much it will help though......never used it.

also got one of these. but hopeing i won't need to use it...

 

[1982ollie]

Cheers Guys - I'll give this a go and let you know!!

 

[ElDopesta]

If there is no adjustment bolt then what Diccon has suggested will need to be done.

Open the valve and stretch the spring or replace it for one that is a little stronger/a little more taught.

El

oh got ya


if you can stiffen up the spring at all then this will help (stretch, shim ???) .....

This is the best possible solution on the matter.

El

 

[1982ollie]

Good man El!!