hi everyone

[david6tme]

So what have u had done to ures then?

 

[B6lee]

Ooh, big list

Will find you a link

 

[B6lee]

This is a rolling thread i update when required

http://www.evoowners.co.uk/f4/work-car-all-done-3825.html

 

[Steveyb_evo3]

my list is longer than yours

no mine is longer than urs

no mine is

no mine

mine
mine lol

sorry lee too easy

 

[B6lee]

Spec

hi all, this is big spec tommi mak




The spec;

Currently running 500bhp

The engine is from a Evo 8 MR built for up to 800bhp covered 14k
HKS valve springs
HKS cam gears
HKS IC hard pipes
Gates cam belt
Cosworth 1.3 head gasket
HKS 272 cams
Tial bov
Cosworth L19 head studs
ARP main studs
Crower con rods
Wiesco 85.5mm pistons (with Teflon coating)
Eagle forged billet crank
Walbro internal fuel pump
Boosh 044 external fuel pump
ACL race series bearings
3mm lash adjusters
Boosh 1000cc injectors
2 bar map sensor
Titanium valve spring retainers
Ralliart thermostat
Standard radiator cap
Balance shaft removal kit
NGK iridium spark plugs
Custom manifold with GT3076 turbo
Slimline fan
4 inch intake with big K&N
Battery relocation kit
Custom 3 inch front pipe
Percision external waste gate 44mm
3 inch full mongoose*
3 inch decat
Vipec ecu (mapped by Mark Shead MA Developments)
AVCR boost controller
Koyo radiator
APS intercooler
HKS turbo timer

Exedy twin plate clutch
Pf 2 piece discs
Brembo 4 pots on front
carbotech XP10 pads
Brembo 2 pots on rear
corbotech XP8 pads
5.1 brake fluid
BC coilovers stiffness, camber (front) height adjustment and now with new stiffer springs 10k front 8k rear

Front and rear strut braces and boot brace

B&M short shifter
Ralliart mat set (not including boot one)
Ralliart mudflaps

 

[B6lee]

my list is longer than yours

no mine is longer than urs

no mine is

no mine

mine
mine lol

sorry lee too easy

Ha ha nice one. I see what you done there lol

 

[david6tme]

Well its a bigger list than mine,lol!
Please bear in mind I am only a learner at engine mods,all my last cars I only done bodywork.
I have: EVO 7 bottom end
Cp 85.5mm forged pistons
Brian crower forged rods with arp 2000 bolts
Cosworth headgasket
Cosworth thermal inlet gasket
Brian crower 0.5mm bigger forged valves
Cosworth kevlar balance shaft and cam belt.
Vernier pulleys
Walbro 255 fuel pump.
Hks air filter
Hks hard pipes
EVO 9 turbo running 22 psi
Uprated exhaust manifold
Uprated intercooler
Scorpion 3inch downpipe and de-cat
3 inch powerflow cat back
rc 750cc injectors
Turbo blanket
Quickshift gear lever
6 paddle clutch and lightened EVO7 flywheel

Think that's it atm

 

[Steveyb_evo3]

i will c if i can remember mine

evo 2 bottom end just shell
e3 head
1.3 cometic head gasket
arp every nut and bolt
acl every bearing
arp gudgen pins
eagle rods
wisco oversized pistons
evo 8 mr crank
will be 750 injectors
oversized rad
plugs and magnicore leads
slim fan
custom intake
hks something exhaust lol
20g turbo with 50 trim
ostrich emulator
fuel pump
balance removal kit
aircon removal
cams no one can tell me wot duration with out measuring them but by mapping the are close to 272s
OS ginken twin plate clutch
lightened and balanced fly wheel
pollybush most
cusco 02r's coilovers
ebc discs
maysport pads

cant remember any more

 

[david6tme]

Nice!I forgot the arp head studs and alloy race tad

 

[mabbs evo]

welcome fella

 

[B6lee]

good spec lads !! but yea, mine is considerably bigger than yours