discs and pads change out

[Wayne'o]

i will be changing my discs and pads out later in the week,
due to the steering wobbling like mad under braking so i think they are warped

but was wondering if you need to go to a garage as sensors may be reset or is it ok to fire on with the job at home...

its an easy job but just conserned about any sensors

 

[Wayne'o]

woops

evo 8 by the way :whistling::whistling::whistling:

 

[fq-craigus]

Ivwould have thought you could do it yourself I'm not aware of any sensors, I have fone my own pads front and the back ones yesterday pins were a sod to get out but all else was ok

 

[Steve220]

Its quite straight forward to discs and pads. No sensors apart from the ABS one, but if you're getting near that, you're doing it wrong.

 

[RsvRob]

As steve says. Easy enough with no sensors to worry about

 

[Wayne'o]

perfect thank you

 

[B6lee]

A long thin punch is required to knock the pins out to remove pads

Then 2 19mm bolts to remove the calipers then 1 small screw which holds the disc to the hub

Simples