M
mikeyb1983
Member
Anyone have any clues as to why my AYC light dies not come in at all?? Is there any test I can do using the obd port to see what faults are present??
Wingnut247
Active Member
Bulb gone in instrument cluster! Bridge pins 1 & 4 and count the flashes! Long flash = 10
Short flash = 1
Then check the number u get against know fault codes! There is a guide about on here somewhere!
Hope this helps
Short flash = 1
Then check the number u get against know fault codes! There is a guide about on here somewhere!
Hope this helps
M
mikeyb1983
Member
Nope tried replacing bulb but still nothing..... Tried bridging and counting flashes but nothing flashes guessing it is the AYC light that should flash.....?? Anything else I can try??
DDS789
Well-Known Member
Seems a bit suspect :wtf:
Any damage to the circuitry running to the bulb?
Someone may have damaged the circuit or cut a wire somewhere to stop it illuminating but leave a bulb there still :disgusted:
Any damage to the circuitry running to the bulb?
Someone may have damaged the circuit or cut a wire somewhere to stop it illuminating but leave a bulb there still :disgusted:
Nine thousand owners. One garage.
Join free to post in the tech forums, list parts for sale, and get into the members' gallery. Takes a minute.