ABS problem

[MR.LANCER]

after changing the clutch on the 4 the brake pedal pulses when applied.
its like driving on snow.
before all this it was fine.

when the abs pump is disconnected the problem is gone.
there is no abs light warning showing on the dash when the car is start or in motion.

have done a diagnostic & nothing has come up.

any ideas would help . . .

 

[sponners]

symptoms sound like you have damaged a tooth or few on the abs ring on the driveshaft.

 

[MR.LANCER]

yes thats what i am thinking.

we had the car up on the ramp & checked both abs rings on the drive shafts.
they seem to appear ok but will check once again.

when the clutch was changed the driveshafts from the wheel hub were not removed as the shaft was seized inside.

 

[frankie2531]

i would check the fliud again a bleed the system again and would go over your work again just to make sure nothing has been un plugged !

 

[MR.LANCER]

could it be the brake master cylinder by any chance ?
i was told there could be a high chance of the brake discs worped'
will have to go over the work again for sure .